Room Monitoring; Announcement/Duplex Mode From An Internal And External Location (Intercom); Initiating The Announcement/Duplex Mode From An Internal Location - TIPTEL 83 system Operating Instructions Manual

System telephone for tiptel 4011 xt and tiptel 3011/ 3022 office/system
Table of Contents

Advertisement

System functions with tiptel 4011 XT

Room monitoring

In order to activate Room monitoring, please follow the instructions of the tiptel 4011 XT manual.
The authorisation to use this feature must be activated at the telephone from which room
monitoring shall be initiated (monitoring telephone). Furthermore the authorisation to execute this
function must be given for the extension telephone number of the monitored tiptel 83 system.
The monitoring and the monitored telephone do not necessarily have to be feature phones.

Announcement/Duplex mode from an internal and external location (Intercom)

These functions are only available for the tiptel 83 system. It is not possible to activate them with
other telephones. However, the initiating telephone does not necessarily have to be a
feature phone.
Should a call come in while your tiptel 83 system is in the announcement/duplex mode, the line
is busy for the calling subscriber.

Initiating the Announcement/Duplex mode from an internal location

Any internal extension can activate the Announcement/Duplex mode by dialling the according
code number before the extension telephone number.
XX in order to execute an Announcement XX = extension telephone number of the
XX in order activate the Duplex mode
Example:
Subscriber 15 executes an announcement at feature phone 22
Requirements:
❍ Subscriber 15 must be authorised to initiate Room Monitoring / Announcement / Duplex mode
❍ Subscriber 22 must be a tiptel 83 system
❍ Subscriber 22 must be authorised to execute an announcement
Subcriber 15 has to dial:
Recommendation: If this feature shall be performed frequently, you can store this code number
on a button.
Remark:
In the following cases, the initiating party will receive an error signal:
❍ The authorisation for the execution of Room Monitoring / Announcement / Duplex mode had
not been activated for the initiating party
❍ The target extension had not been configurated as a feature phone
❍ The authorisation for Announcement and/or Duplex mode had not been activated for the
target feature phone
tiptel 83 system
XX = extension telephone number of the
tiptel 83 system
42

Advertisement

Table of Contents
loading

Table of Contents