Oceanic DATA PLUS Owner's Manual page 42

Oceanic data plus 2
Hide thumbs Also See for DATA PLUS:
Table of Contents

Advertisement

®
• The percentage of oxygen (FO2) in the nitrox mix being used must be set 'before each' nitrox
dive, unless the FO2 50% Default is set to 'Off'.
• The Pre Dive Planning Sequence provides predicted times for subsequent dives. Depending
on cylinder size, breathing gas consumption, and oxygen accumulation you may have less
time available than indicated because of breathing gas quantity or other limitations.
• The Data Plus 2 must be manually activated and be in an operating mode prior to start of a
dive. The unit will not activate automatically by immersion in water.
• Every effort should be made to keep each of the bar graphs in the green throughout your
dives to reduce your risk of exposure to decompression sickness and oxygen toxicity.
• Until it has shut itself off, you must not use the Data Plus 2 at a different altitude than the
altitude where it was originally activated. Doing so will result in an error equal to the dif-
ference in barometric pressure, and possibly a false dive mode with erroneous data.
34
WARNINGS and SAFETY RECOMMENDATIONS

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DATA PLUS and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Data plus 2

Table of Contents