Operational Modes; Temperature/Date/Time Mode; Fo2 Mode - Oceanic DATA PLUS Owner's Manual

®
Fig. 22 - Temperature/
Date/Time
24

OPERATIONAL MODES

While on the surface the Interactive Control Console enables you to access six
operational modes and activate the backlight. During a dive it enables you to
view 'alternate' displays of information and activate the backlight.

TEMPERATURE/DATE/TIME MODE

To view Ambient Temperature/Date/Time (Fig. 22) while in Surface Mode:
• press the Advance (Left) button 1 time
• During low light conditions, the Smart Glo™ backlight will illuminate the
display for button depression time plus 10 seconds.
• The unit reverts to Surface Mode after 10 seconds, unless the Advance
(Left) button is pressed to access FO2 Mode.
Set for Imperial units of measure, Month is on the left and Day on the right.
Set for Metric, Day is on the left and Month on the right. Year doesn't appear.

FO2 MODE

The Data Plus 2 can be used either as an Air computer or as a Nitrox com-
puter. After activation, it will operate as an Air computer without displaying
information associated with oxygen calculations, unless it is set for a percent-
age of oxygen (FO2) other than Air (numerical value between 21 and 50 %).