Summary Of Access To Set Modes - Oceanic DATA PLUS Owner's Manual

®
To access a specific Set mode from the Surface Mode, press the button(s) as follows:
SET MODE
To access>
• Alternate Display (Off)
• Year (1999)
• Month (1)
• Day (1)
• Hour Format (12)
• Hour (12)
• Minute (00)
• Sample Rate (10 FT/3 M)
• Units (Imperial/Metric)
• FO2 Default (On)
• EA (download)
22

SUMMARY OF ACCESS TO SET MODES

(settings entered by the factory appear in italics)
TO ACCESS TOVIEW
Both '1' time>
Left '0' time> Right - toggle (On/Off)>
Left '1' time> Right - 1 year/second>
Left '2' times> Right - 1 month/second>
Left '3' times> Right - 1 day/second>
Left '4' times> Right - toggle 12/24>
Left '5' times> Right - 1 hour/second>
Left '6' times> Right - 1 minute/second>
Left '7' times> Right - 1 rate/second>
Left '8' times> Right - toggle>
Left '9' times> Right - toggle (On/Off)>
Left '10' times>
TO SAVE
Left - to Surface* or Year
Left - to Month
Left - to Day
Left - to Hour Format
Left - to Hour
Left - to Minute
Left - to Surface* or Rate
Left - to Surface* or Units
Left - to Surface* or Default
Left - to Surface* or EA
Left - to Surface
* If the setting was altered