To Start From Microsoft Powerpoint - Canon imagePROGRAF iPF6300S User Manual

Windows Software
7.
Click OK if the message is displayed.
3
8.
Edit and create the document.
Important
• The layout may collapse if you create a form using existing data. If that is the case, modify the data again.

To start from Microsoft PowerPoint

Below are the steps to start Print Plug-In for Office from Microsoft PowerPoint.
1.
Start Microsoft PowerPoint.
2.
If Start imagePROGRAF Print Plug-In is displayed on the toolbar/ribbon, click it.
398
3.
Check that the imagePROGRAF Print Plug-In toolbar/ribbon is displayed.
To start from Microsoft PowerPoint
> Print Plug-In for Office >
Note
• Printing is done in Print Matching Roll Width of the Printing Wizard. For details on Print Match-
ing Roll Width, refer to see "Print Matching Roll Width (Word)."
Important
• If the imagePROGRAF Print Plug-In toolbar/ribbon is not displayed, refer to the following.
• When Print Plug-In for Office is not displayed
.
→P.385
→P.377
iPF6300S