Other Messages; Garo Wxxxx (X Represents A Number); Error Exxx-Xxxx (X Represents A Letter Or Number); Hardware Error. Xxxxxxxx-Xxxx (X Represents A Letter Or Number) - Canon iPF670 User Manual

iPF670

Other Messages

Other Messages

GARO Wxxxx (x represents a number) ............................................................................................................ 573

ERROR Exxx-xxxx (x represents a letter or number) ....................................................................................... 573

Hardware error. xxxxxxxx-xxxx (x represents a letter or number) ..................................................................... 573

Top cover is open. .......................................................................................................................................... 574
Prepare for parts replacement. ....................................................................................................................... 574
Parts replacement time has passed. ............................................................................................................... 574
Unknown file. .................................................................................................................................................. 574
Multi-sensor error ........................................................................................................................................... 574
Error in cutter position. ................................................................................................................................... 574
GARO Wxxxx (x represents a number)
GARO Wxxxx (x represents a number)
Cause
There is a problem with the print job.
ERROR Exxx-xxxx (x represents a letter or number)
ERROR Exxx-xxxx (x represents a letter or number)
Cause
An error requiring service may have occurred.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
The last portion of roll paper was used during a print job. The paper
was not advanced because the trailing edge is taped to the roll.
Fastening tape or the Belt Stopper has not been removed inside
the Top Cover.
An error requiring service may have occurred.
Hardware error. 03130031-2F7x (x is 0, 1, or 2)
Cause
The ink tank is not
installed correctly.
User's Guide
Downloaded from ManualsPrinter.com Manuals
Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
Write down the error code and message, turn off the printer, and contact your Can-
on dealer for assistance.
Cause
Turn off the power, remove and then reinstall all of the ink tanks, and then turn on the power.
If the same message is displayed again, write down the error code and message, turn off the printer, and
contact your Canon dealer for assistance. (See "Replacing Ink Tanks.")
Corrective Action
Corrective Action
Corrective Action
Turn off the printer and remove the roll from the printer before
restoring power.
Turn off the printer, open the Top Cover and remove the tape
or the Belt Stopper before restoring power.
Turn off the printer and wait at least three seconds before re-
storing the power.
If the message is displayed again, write down the error code
and message, turn off the printer, and contact your Canon
dealer for assistance.
Corrective Action
GARO Wxxxx (x represents a number)
P.496
➔
573