No Printhead; Execute Printhead Cleaning - Canon imagePROGRAF iPF650 User Manual

Error Message > Messages regarding printheads

No printhead

Cause
No Printhead is installed.

Execute printhead cleaning.

Cause
The Printhead
nozzles are clog-
ged.
12
828
No printhead
>
Corrective Action
Install the Printhead.
(See "Replacing the Printhead.")
Follow these steps to clean the Printhead.
1. Stop printing by pressing ▲ or ▼ to select Stop Printing.
2. Clean the Printhead.
(See "Cleaning the Printhead.")
If the message is still displayed when printing, replace the Printhead.
(See "Replacing the Printhead.")
Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, note
that this error may affect the printing quality.
If OK is shown on the Display Screen, clean the Printhead.
1. Press the OK button on the Control Panel to stop printing.
2. Clean the Printhead.
(See "Cleaning the Printhead.")
If the message is still displayed when printing, replace the Printhead.
(See "Replacing the Printhead.")
→P.742
Corrective Action
→P.741
→P.742
→P.741
→P.742
iPF650