Canon imagePROGRAF iPF650 User Manual page 695

Large format printer
Hide thumbs Also See for imagePROGRAF iPF650:
Table of Contents

Advertisement

Adjust
Feed
Adjust
Printer
Priori-
Length
ty
Main-
Head Cleaning
te-
nance
Nozzle Check
Replace P.head
Repl. maint cart
Head Info
GL2 Replot
GL2 BufferClear
GL2
Quality
Color
Set-
Man-
Mode
tings
ager
Print Quality
Input Resolution
iPF650
Setting Item
Adjust-
A:High
ment-
B:Standard/Draft
Print
Chang
A:High
e Set-
B:Standard/Draft
tings
Monochrome
Color (CAD) 1
Color (CAD) 2
Color (CAD) 3
Color (CAD) 4
Color (CAD) 5
Control Panel
Description, Instructions
Print a test pattern for particular types of paper to
compensate for paper stretching or shrinkage, after
which you enter the amount of adjustment. (See "Ad-
justing Line Length (Adjust Length).")
Displayed when you have selected Feed Priority >
Adj. Priority > Print Length.
Adjustment relative to the amount of stretching or
shrinkage of the current paper.
Enter either the adjustment results from Adjustment-
Print or the discrepancy that you measured (as a per-
centage).
For paper that tends to stretch, increase the feed
amount by choosing a higher adjustment value. For
paper that tends to shrink, decrease the feed amount by
choosing a lower adjustment value.
Clean the Printhead. (See "Cleaning the Printhead.")
→P.741
Choose Head Cleaning A if printing is faint, oddly
colored, or contains foreign substances.
Choose Head Cleaning B if no ink is printed at all, or
if printing is not improved by Head Cleaning A.
Print a test pattern to check the nozzles.
When replacing the Printhead, choose Yes and follow
the instructions on the screen. (See "Replacing the
Printhead.")
→P.742
Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.
When replacing the Maintenance Cartridge, choose
Yes and follow the instructions on the screen. (See
"Replacing the Maintenance Cartridge.")
→P.750
Indicates information about the printhead.
Print the previous GL2 print job again.
Clear the print data in the replot buffer.
Print in monochrome.
Print in standard colors.
Print in brighter colors.
Print emulating the following printers, in colors re-
sembling colors produced by these printers: Canon BJ-
W3000/W3050.( *2
)
→P.685
Print emulating the HP Designjet 500/800, in colors
resembling colors produced by these printers.
( *2
)
→P.685
Print emulating the HP Designjet 1000, in colors re-
sembling colors produced by this printer.
( *2
)
→P.685
Choose the print quality.
Choose the printer input resolution, 600dpi or 300dpi.
>
Printer Menu
>
→P.634
8
679
Menu Settings

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents