Specifying The Printer's Frame Type - Canon imagePROGRAF iPF650 User Manual

Network Setting > NetWare Settings

Specifying the Printer's Frame Type

To enable communication between the printer and computers on your network, specify the Ethernet frame type in your Net-
Ware environment.
Follow the steps below to specify the frame type by using imagePROGRAF Device Setup Utility or the printer Control
Panel.
Important
• Before specifying the frame type, make sure the printer is on and connected to the network.
Note
• You can specify the frame type by using RemoteUI if the printer's IP address is configured.
• For instructions on installing imagePROGRAF Device Setup Utility, see "Installing imagePROGRAF De-
vice Setup Utility."
Specifying the frame type using imagePROGRAF Device Setup Utility
1.
Start imagePROGRAF Device Setup Utility.
2.
9
In the list of printers, select the printer to configure.
3.
Choose Protocol Settings from the Printer menu.
710
Specifying the Printer's Frame Type
>
.
→P.407
iPF650