Canon imagePROGRAF iPF650 User Manual page 724

Network Setting > Initial Settings
Primary DNS Server Address
Secondary DNS Server Address
Use the same host name and do-
main name as IPv4
Perform dynamic updating of
stateful addresses
Dynamically update the stateless
address
Dynamically update the manual
address
7.
9
Click OK to display the Network page.
Note
• If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS serv-
ers and DNS domain name in Primary DNS Server Address, Secondary DNS Server Address and DNS
Domain Name, respectively.
708
Configuring the Printer's TCP/IP Network Settings With RemoteUI
>
Item
Prefix Length Enter the IP address prefix length.
Default Router Ad- Enter the default router address.
dress
Prefix Length Enter the prefix length of the default router address.
Specify the IP address of the primary DNS server.
Specify the IP address of the secondary DNS server.
Activate when using the same DNS host and domain
names as for IPv4.
DNS Host Name Specify the printer host name, up to 63 characters (1–
63 characters). Use single-byte letters, numbers, and -
(hyphens). Do not use numbers or - for the first charac-
ter or - for the last character.
DNS Domain Name Specify the printer domain name, up to 63 characters.
Use single-byte letters, numbers, - (hyphens), and . (pe-
riods). Do not use numbers, -, or . for the first charac-
ter, or - or . for the last character.
Activate this setting to automatically register the state-
ful address with the DNS server.
Activate this setting to automatically register the state-
less address with the DNS server.
Activate this setting to automatically register the man-
ual address with the DNS server.
Details Default Setting
0
::
0
::
::
Off
NB-18GBip6xxxxxx
blank
Off
Off
Off
iPF650