Canon imagePROGRAF iPF650 User Manual page 722

Network Setting > Initial Settings
3.
If a password has been set on the printer, enter the password.
4.
Click Network in the Device Manager menu at left to display the Network page.
5.
Click Edit in the upper-right corner of the TCP/IPv4 group to display the Edit TCP/IP Protocol Settings page.
6.
Refer to the TCP/IP Settings Items table to complete the settings.
TCP/IP Settings Items
Item
Use DHCP
Use BOOTP
Use RARP
Enable DNS Dy-
namic Update
Use Zeroconf Func-
tion
IP Address
Subnet Mask
Gateway Address
LPD Printing
9
IPP Printing
IPP Printer URI
RAW Printing
RAW Mode Bi-di-
rection
FTP Printing
Use Discovery
Scope
SMTP Server Ad-
dress
Primary DNS Serv-
er Address
706
Secondary DNS
Server Address
DNS Host Name
DNS Domain Name
Configuring the Printer's TCP/IP Network Settings With RemoteUI
>
Activate this setting to use DHCP for configuring the IP address.
Activate this setting to use BOOTP for configuring the IP address.
Activate this setting to use RARP for configuring the IP address.
Activate this setting to perform DNS server registration automati-
cally.
Activate this setting to use Bonjour.
Specify the printer's IP address.
Specify the printer's subnet mask.
Specify the printer's default gateway.
Activate this setting to use LDP Printing.
Activate this setting to use IPP Printing.
Specify the URI of the printer used for IPP printing using up to
252 characters.
Activate this setting to use Raw Printing.
Activate this setting to use Raw mode bidirectional communica-
tion.
Activate this setting to use FTP Printing.
Activate this setting to use SLP Discovery function.
Enter the SLP search range.
Specify the SMTP server's IP address.
You can also specify the SMTP server domain name, if desired.
Specify the IP address of the primary DNS server.
Specify the IP address of the secondary DNS server.
Specify the printer host name, up to 63 characters (1–63 charac-
ters). Use single-byte letters, numbers, and - (hyphens). Do not use
numbers or - for the first character or - for the last character.
Specify the printer domain name, up to 63 characters. Use single-
byte letters, numbers, - (hyphens), and . (periods). Do not use
numbers, -, or . for the first character, or - or . for the last charac-
ter.
Details Default Setting
Off
Off
Off
Off
On
0.0.0.0
0.0.0.0
0.0.0.0
On
On
printer
On
Off
On
On
default
0.0.0.0
0.0.0.0
0.0.0.0
NB-18GBipxxxxxx
blank
iPF650