Canon imagePROGRAF iPF650 User Manual page 600

Handling Paper > Handling rolls
5.
Press ▲ or ▼ to select the type of paper loaded in the printer, and then press the OK button.
Using the Same Type of Paper Regularly
Configure this setting so that current media type settings will be automatically selected when you load the same type of
paper later.
1.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Paper tab (
5
2.
Press the OK button.
The Paper Menu is displayed.
3.
Press ▲ or ▼ to select Keep Paper Type, and then press the OK button.
4.
Press ▲ or ▼ to select On, and then press the OK button.
Note
• The specified media type setting is updated in the following situations.
• When using sheets, if you send a print job before loading a sheet, the media type setting is updated to
584
match the type of paper specified by the print job.
• When you have selected ManageRemainRoll > On on the Control Panel and a barcode is printed on the
roll, the media type setting is updated to match the type of paper specified by the barcode.
• To change the media type setting, see "Changing the Type of Paper."
Changing the Type of Paper
>
Important
• Be sure to select the correct paper type. If this setting does not match the loaded paper, it may cause
feed errors and affect printing quality.
Note
• For details on types of paper, see the Paper Reference Guide. (See "Types of Paper.")
default, Plain Paper is selected.
• If you move the Release Lever, the setting automatically reverts to the previously selected paper.
Note
• If the Tab Selection screen is not displayed, press the Menu button.
→P.568
).
→P.583
By
iPF650