Configuring The Printer's Netware Network Settings With Remoteui - Canon imagePROGRAF iPF650 User Manual

Configuring the Printer's NetWare Network Settings With RemoteUI

Follow the steps below to configure NetWare protocol settings other than the frame type by using RemoteUI.
Note
• For details on RemoteUI, see "Using RemoteUI."
1.
Start the web browser and enter the following URL in the Location (or Address) box to display the RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
3.
If a password has been set on the printer, enter the password.
4.
Click Network in the Device Manager menu at left to display the Network page.
5.
Click Edit in the upper-right corner of the NetWare group to display the Edit NetWare Protocol Settings page.
6.
Refer to the NetWare Settings Items table to complete the settings.
NetWare Settings Items
Item
Frame Type
NCP Burst Mode
Print Application
Packet Signature
Bindery PSer- File Server
ver Name
Print Server
Name
Print Server
Password
Polling Interval
iPF650
→P.697
Details
Specify the type of frame to use in NetWare.
Activate this setting to use NCP Burst Mode.
This mode supports fast data transfer when printing in queue
server mode. Normally, leave the setting On.
Choose the print service.
The print service selected here is enabled. Multiple print services
cannot be enabled simultaneously.
• Bindery PServer
• RPrinter
• NDS PServer
• NPrinter
Select If Requested by Server to use packet signature.
Specify the name of a file server that has a NetWare print server.
(0–47 characters)
Specify the name of a NetWare print server.
(0–47 characters)
Set a password for the print server.
(0–20 characters)
Specify the interval to confirm jobs.
Configuring the Printer's NetWare Network Settings With RemoteUI
Network Setting > NetWare Settings
Default Set-
ting
Disabled
On
NDS
PServer
If Re-
quested
by Server
—
—
—
5
>
9
717