Installing With The Add-A-Plotter Wizard - Canon imagePROGRAF iPF650 User Manual

Installing with the Add-A-Plotter Wizard

Follow the procedure below to use the Add-A-Plotter Wizard to install the HDI driver without the Canon installer.
1.
After AutoCAD starts, select Plotter Manager from the File menu.
The Plotters window opens. Click the Add-A-Plotter Wizard icon.
2.
The Add Plotter - Introduction Page screen opens. Check the displayed screen and then click the Next button.
Note
• To open the Add-A-Plotter Wizard you can also click Start > Control Panel > Autodesk Plotter
Manager > and then click the Add-A-Plotter Wizard icon in the Plotters window.
iPF650
Windows Software > HDI Driver
Installing with the Add-A-Plotter Wizard
>
3
367