Canon imagePROGRAF iPF650 User Manual page 698

Control Panel > Printer Menu
Inter-
face
Setup
8
682
Menu Settings
>
Setting Item
TCP/I IPv4
IPv4
P
Set-
tings
DNS
Set-
tings
IPv6 IPv6 Support
IPv6 StlessAddrs
DHCPv6
DNS
Set-
tings
Net- NetWare
Ware
Frame Type
Print Service
AppleTalk
Ether- Auto Detect
net
Driver
Comm.Mode
Ethernet Type
Spanning Tree
IP Address Specify the printer network information when using a
static IP address.
Subnet Mask
Enter the IP address assigned to the printer, as well as
Default G/W the network subnet mask and default gateway.
DNS Dync update Specify whether DNS server registration is updated
automatically.
Pri. DNS Specify the DNS server address.
SrvAddr
Sec. DNS
SrvAddr
DNS Host Name Specify the DNS host name.
DNS Domain Specify the DNS domain name.
Name
Specify whether to connect via IPv6.
Specify whether a IPv6 stateless address is used.
Specify whether DHCPv6 settings are used.
DNS State- Specify whether DNS server registration is updated
Dync full automatically.
update Addr
State-
less
Addr
Pri. DNS Specify the DNS server address.
SrvAddr
Sec. DNS
SrvAddr
DNS Host Name Specify the DNS host name.
DNS Domain Specify the DNS domain name.
Name
Specify the NetWare protocol. To apply your changes,
choose Register Setting.
Specify the frame type to use.
Choose the print service.
Specify whether to use the AppleTalk protocol. To ap-
ply your changes, choose Register Setting.
Specify the communication method. To apply your
changes, choose Register Setting.
Choose On for automatic configuration of the LAN
communication protocol. Choose Off to use settings
values of Comm.Mode and Ethernet Type.
Choose the LAN communication method.
Choose the LAN transfer rate.
Choose whether spanning-tree packets are supported
over the LAN.
Description, Instructions
iPF650