Messages Regarding Printheads; Cannot Adjust Printhead; Wrong Printhead; Printhead Error - Canon iPF760 User Manual

iPF760

Messages regarding printheads

Messages regarding printheads

Cannot adjust printhead. .............................................................................................................................. 591

Wrong printhead. ......................................................................................................................................... 591

Printhead error ............................................................................................................................................. 591

No printhead ................................................................................................................................................ 591

Execute printhead cleaning. ........................................................................................................................ 591

Cannot adjust printhead. Cannot adjust printhead.
Cause
The Printhead nozzles are clogged.
The Printhead cannot be aligned;
highly transparent film is loaded.
The Printhead is installed crooked.
Wrong printhead. Wrong printhead.
Cause
An incompatible Printhead has been installed.
Printhead error Printhead error
Cause
There is a problem with the Printhead.
No printhead
No printhead
Cause
No Printhead is installed.
Execute printhead cleaning.
Execute printhead cleaning.
Cause
The Printhead noz- Follow these steps to clean the Printhead.
zles are clogged.
1.
Stop printing by pressing ▲ or ▼ to select Stop Printing.
2.
Clean the Printhead.
User's Guide
Execute Head Posi. Adj. again, as follows.
1.
Press the OK button to clear the error.
2.
Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.")
3.
Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.")
4.
Execute Head Posi. Adj. again.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).")
Press the OK button to clear the error.
We recommend using a type of paper that you often use, other than film, for Printhead adjustment.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).")
Straighten the Printhead as follows, and then execute Head Posi. Adj. again.
1.
Press the OK button to clear the error.
2.
Use Head Inc. Adj. to adjust the angle of inclination of the Printhead.
(See "Adjusting Line Misalignment (Head Inc. Adj.).")
3.
Execute Head Posi. Adj. again.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).")
Open the Top Cover and replace the Printhead with a new one.
(See "Replacing the Printhead.")
Open the Top Cover and replace the Printhead with a new one.
(See "Replacing the Printhead.")
Corrective Action
Install the Printhead.
(See "Replacing the Printhead.")
(See "Cleaning the Printhead.")
Corrective Action
→P.524
→P.525
Corrective Action
→P.526
Corrective Action
→P.526
→P.526
Corrective Action
→P.525
Cannot adjust printhead.
→P.502
→P.502
→P.505
→P.502
591