Top Cover Is Open; Prepare For Parts Replacement; Parts Replacement Time Has Passed; Unknown File - Canon imagePROGRAF iPF650 User Manual

An error requiring service may have occurred.

Top cover is open.

Cause
The printer has detected that the Top Cov-
er is open.

Prepare for parts replacement.

Cause
It is almost time to replace consuma-
bles for which service is required.

Parts replacement time has passed.

It is past the recommended time to replace consumables for which service
is required.

Unknown file.

Cause
Data sent to keep the printer up to date (such as
paper information) is in the wrong format.
You have uploaded firmware for a different
model.
iPF650
Cause
Open the Top Cover fully, remove any foreign objects, and close the Top
Cover again.
If the error occurs again, close the Top Cover, turn off the printer, and
wait a while before restoring power.
You can continue to use the printer for some time until "Parts replacement
time has passed." will be displayed.
Contact your Canon dealer for assistance.
Cause
Check the data. Turn off the printer and wait a while before restor-
ing power, and then resend the data.
Check the firmware version. Turn off the printer and wait a while
before restoring power, and then resend the firmware.
If the message is displayed again, contact your Canon dealer for as-
sistance.
Error Message
Corrective Action
Turn off the printer and wait at least three seconds be-
fore restoring the power.
If the message is displayed again, write down the error
code and message, turn off the printer, and contact
your Canon dealer for assistance.
Corrective Action
Corrective Action
Corrective Action
Contact your Canon dealer for assistance.
Corrective Action
> Other Messages >
12
833
Top cover is open.