Canon imagePROGRAF iPF650 User Manual page 699

Inter- Ether-
MAC Address
face net
Setup Driver
Interface Print
Return Defaults
System Sleep Timer
Setup
Buzzer
Contrast Adj.
Date & Date
Time
Time
Date Format
Language
Time Zone
Length Unit
Detect Mismatch
Paper Roll Selection 1
Size
Basis
Roll Selection 2
Keep Paper Size
iPF650
Setting Item
Control Panel
Description, Instructions
Indicates the MAC address.
Print interface settings information.
Choose OK to restore Interface Setup settings to the
default values.
Specify the period before the printer enters sleep
mode.
Choose On for the buzzer to sound in case of errors.
Adjust the Display Screen contrast level.
Set the current date.
Set the current time. Available only if the Date setting
is specified.
Specify the date format.
Specify the language used on the Display Screen.
Specify the time zone. Time zone options indicate a
main city in this time zone and the difference from
Greenwich Mean Time.
Choose the display unit for length. Change the unit
displayed for the remaining amount of roll paper,
Tot.Print Area, and so on.
Specify printing behavior if the type and size of paper
specified in the printer menu does not match the type
and size in the printer driver.
Choose Pause to have printing paused under these cir-
cumstances. Choose Warning to continue printing af-
ter notification. Choose None to continue printing
without notification.
If roll size detection is activated, choose whether ISO
A3 (297mm) or 300mm Roll is applied when a roll of
an intermediate width is detected.
If roll size detection is activated, choose whether 10in.
(254mm) or JIS B4 (257mm) is applied when a roll
of an intermediate width is detected.
Choose On to use the paper size setting as the basis
for printing instead of other settings. The margin set-
ting of the printer menu will be used instead of the
margin setting of the printer driver if the latter is
smaller, which may prevent text or images in the mar-
gin from being printed.
> Printer Menu >
8
683
Menu Settings