Replotting With Hp-Gl/2 Jobs Is Not Possible; The Printer Stops When Printing A Hp-Gl/2 Job (The Carriage Stops Moving) - Canon imagePROGRAF iPF650 User Manual

Troubleshooting > HP-GL/2 problems

Replotting with HP-GL/2 jobs is not possible.

Cause
The data was lost be-
cause of replotting.

The printer stops when printing a HP-GL/2 job (the carriage stops moving)

The printer is analyzing the print job.
A job was printed when Input Resolution in the
Control Panel menu was set to 600dpi.
11
802
Replotting with HP-GL/2 jobs is not possible.
>
Data for replotting is lost after the following operations. In this case, send the print job again.
• The memory buffer was cleared from the Control Panel.
• The printer was turned off.
• The printer has received a new HP-GL/2 print job.
• Printing has been canceled
Cause
Corrective Action
Corrective Action
Please wait a while until printing is finished.
In the Control Panel menu, set Input Resolution to 300dpi and
print again.
(See "Menu Settings.")
→P.674
iPF650