Canon imagePROGRAF iPF650 User Manual page 694

Control Panel > Printer Menu
Test
Print
Adjust
Printer
8
678
Menu Settings
>
Setting Item
Paper Details
Print Job Log
Menu Map
Color Palette
Head Auto(Standard)
Posi.
Adj.
Auto(Advanced)
Manual
Head Inc. Adj.
Feed Adj. Automatic
Priori- Priori-
Print Quality
ty ty
Print Length
Adj. Auto(GenuinePpr)
Quality
Auto(OtherPaper)
Manual
Description, Instructions
Print the paper settings as specified in Paper Details.
Print a record of print jobs, including the paper type
and size, amount of ink consumed, and so on. Ink con-
sumption indicates a rough estimate of how much ink
was consumed per page.( *1
→P.685
Print the menu structure.
Print the GL2 color palette.
The printer prints and reads a test pattern for the auto-
matic adjustment of Printhead alignment relative to
the printing direction. (See "Automatic Adjustment
to Straighten Lines and Colors (Head Posi. Adj.).")
→P.619
The printer prints and reads a test pattern for the auto-
matic adjustment of Printhead alignment relative to
the printing direction and spacing between nozzles and
colors. (See "Automatic Adjustment to Straighten
Lines and Colors (Head Posi. Adj.).")
Print a test pattern for adjustment of Printhead align-
ment relative to the printing direction. Enter the ad-
justment value manually based on the resulting pat-
tern. (See "Manual Adjustment to Straighten Lines
and Colors (Head Posi. Adj.).")
Print a test pattern for adjustment of the Printhead ori-
entation. (See "Adjusting Line Misalignment (Head
Inc. Adj.).")
→P.623
Specify exact paper feeding, if desired. Normally, se-
lect Automatic. Choose Print Quality for attractive
printing. Choosing Print Quality also makes banding
less noticeable. Choose Print Length if you prefer to
feed the paper an exact amount. However, note that
slight banding may occur in the direction of carriage
scanning when Print Length is selected.
Specify this mode with paper identified in the Paper
Reference Guide.
The printer prints and reads a test pattern for automat-
ic adjustment of the feed amount. (See "Automatic
Banding Adjustment (Adj. Quality).")
Specify this mode with paper not in the Paper Refer-
ence Guide.
The printer prints and reads a test pattern for automat-
ic adjustment of the feed amount. Note that this func-
tion takes more time and consumes more ink than Au-
to(GenuinePpr). (See "Automatic Banding Adjust-
ment (Adj. Quality).")
→P.630
Use this mode with highly transparent media or other
paper for which Auto(GenuinePpr) or Auto(Other-
Paper) cannot be used.
Print a test pattern for adjustment of the feed amount
based on the type of paper. (See "Manual Banding
Adjustment (Adj. Quality).")
)
→P.619
→P.621
→P.630
→P.631
iPF650