Backup/Restore Configuration - Fujitsu PRIMERGY 10/40GbE User Manual

2.7.4

Backup/Restore configuration

We can backup the configuration to server or restore it by downloading configuration file from server. FTP
or TFTP protocol can be used. FTP server function is activated in this product. Therefore, we can access it by
FTP client and put or get its configuration to backup or restore. We can backup or restore the configuration
by copy command on CLI if using TFTP server.
Backup by FTP server can be done as following. (This example is on Window OS command prompt.)
C:<config>ftp△192.168.1.10 #Connect with FTP to Connection Blade
User (192.168.1.100:(none)): admin
331 Password required for admin.
Password:
230 User admin logged in.
ftp> bin
200 Type set to I
ftp>get△config1△config1-1
・
・
ftp>bye
221 Goodbye
C:<config>
Restore by FTP server can be done as following. (This example is on Window OS command prompt.)
C:<config>ftp△192.168.1.10
Blade
User (192.168.1.100:(none)): admin
331 Password required for admin.
Password:admin
230 User admin logged in.
ftp> bin
200 Type set to I
ftp>put△config1-1△config1
・
・
226 Write complete
2856 bytes sent in 1.10 seconds (2.44 Kbytes/s)
ftp>get△reset
・
・
ftp>bye
221 Goodbye
C:<config>
PRIMERGY 10/40GbE Connection Blade 18/8+2 User Guide
#Enter User Name
#Enter Password
#Change to binary mode
#backup config1 to config1-1 file
#exit FTP access
#Connect with FTP to Connection
#Enter User Name
#Enter Password
#Change to binary mode
#Restore config1-1 to config1
#Restart connection blade
#exit FTP access
Page 12 / 23