Configuring The Line Overview Display - Siemens HIPATH 8000 User Manual

Making and receiving calls using multi-line phones
Step by Step
User
Configuration
Keyset
Overview
Line 1
Use FPK order
Add all lines
Save & Exit
88

Configuring the line overview display

Specify here the sequence in which the individual lines
in the line overview should appear on the display.
N
Press the key shown.
Select and confirm the option shown.
j
if nec. Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
All lines that are displayed in the overview (
are listed.
Select and confirm the required line (e.g. line 1).
Select one of the following options from the context
menu to move an individual line:
• Move up
• Move down
• Move to top
• Move to bottom
or
Select and confirm the option shown to arrange the
lines in the same sequence as the line keys
or
Select and confirm the option shown to display all line
keys in the overview.
The setting made for "Allow in overview"
(
Select and confirm the option shown.
page 86) is disregarded here.
page 86)