Lonwork Cables Connection; Connections Of Reader Cables - Honeywell Temaline TK-S014 Installation Manual

Lonwork cables connection

Screw the twisted pair cable to LON-A and LON-B
The polarity of the LONWORKS
A very common error in Lonwork cabling is to forget to terminate the lines; this can cause a variety
of unpredictable errors in the system; so please remember to add resistors terminators on the LON
cabling!
Refer to the above chapters on the different Lonwork wiring typologies for the related terminators details.

Connections of Reader cables

Connect the shielded cables coming from the readers to the terminal screws on the RTUA08 as shown in
Figure 10. The shields must be connected directly to the main earth ground.
16
Figure 8 Free topology connection
®
cables is not significant.
Figure 9 LON cable connectuion
GND
Wiegand0
Wiegand1
+12V
LED-RED
LED-GREEN
BUZZER
EARTH
GROUND
GND
Wiegand0
Wiegand1
+12V
LED-RED
LED-GREEN
BUZZER
Figure 10. Cable Connection to RTU A08 Wiegand Module
GND
WIE0-IN1
WIE1-IN1
+12VRDR
LED-RED1
LED-GREEN1
BUZZER1
GND
GND
WIE0-IN2
WIE1-IN2
+12VRDR
LED-RED2
LED-GREEN2
BUZZER2
GND
TK_S014 – Installation Manual