Diagnostics Utilities - NETGEAR ProSafe FVS318N Reference Manual

Table 92. Wireless Profile Status screen fields (continued)
Item Description
Connected Clients
MAC Address The MAC address of the client.
Radio The radio to which the client is connected. By default, the radio is always 1, indicating the
2.4 GHz radio.
Security The type of security that the client is using (Open, WEP, WPA, WPA2, or WPA+WPA2).
Encryption The type of encryption that the client is using (CCMP, TKIP, or TKIP + CCMP).
Authentication The type of authentication that the client is using (Open, PSK, RADIUS, or PSK+RADIUS).
Time The period in minutes since the connection was established between the access point and
Connected the client.

Diagnostics Utilities

• Send a Ping Packet
• Trace a Route
• Look Up a DNS Address
• Display the Routing Tables
• Capture Packets in Real Time
• Reboot the Wireless VPN Firewall Remotely
The wireless VPN firewall provides diagnostic tools that help you analyze the status of the
network and traffic conditions. Two types of tools are available:
• Network diagnostic tools. These tools include a ping utility, traceroute utility, and DNS
lookup utility, and the option to display the routing tables.
• Packet capture tool. This tool lets you capture packets per interface in real time for a
short period, and then download the packet information.
Note: For normal operation, diagnostic tools are not required.

To display the Diagnostics screen:
1. Select Monitoring > Diagnostics. The Diagnostics screen displays the IPv4 settings (see
the next figure).
2. Specify the IP version for which you want to display the Diagnostics screen:
• IPv4. In the upper right of the screen, the IPv4 radio button is already selected by
default.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Monitor System Access and Performance
373