View The Wan Port Status - NETGEAR ProSafe FVS318N Reference Manual

2. Click the Status option arrow in the upper right of the Port Triggering screen. The Port
Triggering Status pop-up screen displays.
Figure 219.
The Port Triggering Status screen displays the information that is described in the
following table:
Table 89. Port Triggering Status screen information
Item
#
Rule
LAN IP Address
Open Ports
Time Remaining

View the WAN Port Status

You can view the status of the IPv4 and IPv6 WAN connections, the DNS servers, and the
DHCP servers.
IPv4 WAN Port Status

To view the IPv4 status of the WAN port:
1. Select Network Configuration > WAN Settings > Broadband ISP Settings (IPv4).
The Broadband ISP Settings (IPv4) screen displays (see
2. Click the Broadband Status option arrow in the upper right of the screen to display the
Connection Status pop-up screen. (The following figure shows a static IP address
configuration.)
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Description
The sequence number of the rule onscreen.
The name of the port triggering rule that is associated with this entry.
The IP address of the computer or device that is currently using this rule.
The incoming ports that are associated with this rule. Incoming traffic using one of
these ports is sent to the IP address that is listed in the LAN IP Address field.
The time remaining before this rule is released and made available for other
computers or devices. This timer is restarted when incoming or outgoing traffic is
received.
Monitor System Access and Performance
Figure 10
367
on page 29).