NETGEAR ProSafe FVS318N Reference Manual page 289

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
2. Specify the IP version for which you want to open the SSL portal login screen:
• IPv4. In the upper right of the screen, the IPv4 radio button is already selected by
default. Go to Step
Figure 173. Portal Layouts screen for IPv4
• IPv6. Select the IPv6 radio button. The Portal Layouts screen displays the IPv6
settings.
Figure 174. Portal Layouts screen for IPv6
3. In the Portal URL field of the List of Layouts table, click the URL that corresponds to the SSL
portal login screen that you want to open. The SSL portal login screen displays. (The
following figure shows the CSup layout that was defined in
page 268.)
Virtual Private Networking Using SSL Connections
3.
289
Create the Portal Layout on