NETGEAR ProSafe FVS318N Reference Manual page 208

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 120.
3. Select the A router or a VPN gateway radio button, and click Next. The VPN tunnel
parameters wizard screen (screen 2 of 3) displays:
Figure 121.
4. Specify the following VPN tunnel parameters:
• IP or DNS public (external) address of the remote equipment. Enter the remote IP
address or DNS name of the wireless VPN firewall. For example, enter
192.168.15.175.
• Preshared key. Enter the pre-shared key that you already specified on the wireless
VPN firewall. For example, enter I7!KL39dFG_8.
• IP private (internal) address of the remote network. Enter the remote private IP
address of the wireless VPN firewall. For example, enter 192.168.1.0. This IP address
enables communication with the entire 192.168.1.x subnet.
Virtual Private Networking Using IPSec and L2TP Connections
208