Configure The Ipv6 Router Advertisement Daemon And Advertisement Prefixes For The Dmz - NETGEAR ProSafe FVS318N Reference Manual
Prosafe wireless-n 8-port gigabit vpn firewall
Hide thumbs
Also See for ProSafe FVS318N:
- Reference manual (414 pages) ,
- Cli reference manual (297 pages) ,
- User manual (17 pages)
Table of Contents
Advertisement
2.
Enter the settings as explained in the following table:
Table 20. DMZ IPv6 Config screen settings
Setting
Start IPv6 Address
End IPv6 Address
Prefix Length
3.
Click Apply to save your changes and add the new IPv6 address pool to the List of IPv6
Address Pools table on the DMZ Setup (IPv6) screen.
To edit an IPv6 DMZ address pool:
1.
On the DMZ Setup screen for IPv6 (see
the Action column for the address pool that you want to modify. The DMZ IPv6 Config
screen displays.
2.
Modify the settings as explained in the previous table.
3.
Click Apply to save your settings.
To delete one or more IPv6 DMZ address pools:
1.
On the DMZ Setup screen for IPv6 (see
the left of each address pool that you want to delete, or click the Select All table button
to select all address pools.
2.
Click the Delete table button.
Configure the IPv6 Router Advertisement Daemon and
Advertisement Prefixes for the DMZ
Note:
If you do not configure stateful DHCPv6 for the DMZ but use
stateless DHCPv6, you need to configure the Router Advertisement
Deamon (RADVD) and advertisement prefixes.
The RADVD is an application that uses the Neighbor Discovery Protocol (NDP) to collect
link-local advertisements of IPv6 addresses and IPv6 prefixes in the DMZ. The RADVD then
distributes this information in the DMZ, which allows IPv6 clients to configure their own IPv6
address.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Description
Enter the start IP address. This address specifies the first of the contiguous
addresses in the IP address pool. Any new DHCPv6 client joining the DMZ is
assigned an IP address between this address and the end IP address.
Enter the end IP address. This address specifies the last of the contiguous
addresses in the IP address pool. Any new DHCPv6 client joining the DMZ is
assigned an IP address between the start IP address and this IP address.
Enter the IPv6 prefix length, for example, 10 or 64.
LAN Configuration
Figure 45
on page 90), click the Edit button in
Figure 45
on page 90), select the check box to
93
Advertisement
Table of Contents
Troubleshooting
