NETGEAR ProSafe FVS318N Reference Manual page 105

Table 26. Add IPv6 Static Routing screen settings (continued)
Setting
Interface
IPv6 Gateway
Metric
5. Click Apply to save your settings. The new static route is added to the List of IPv6 Static
Routes table.

To edit an IPv6 static route:
1. On the Static Routing screen for IPv6 (see
in the Action column for the route that you want to modify. The Edit IPv6 Static Routing
screen displays. This screen is identical to the Add IPv6 Static Routing screen.
2. Modify the settings as explained in the previous table.
3. Click Apply to save your settings.

To delete one or more routes:
1. On the Static Routing screen for IPv6 (see
to the left of each route that you want to delete, or click the Select All table button to
select all routes.
2. Click the Delete table button.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Description
From the drop-down list, select the physical or virtual network interface (WAN1,
sit0 Tunnel, LAN, or DMZ interface) through which the route is accessible.
The gateway IPv6 address through which the destination host or network can be
reached.
The priority of the route. Select a value between 2 and 15. If multiple routes to the
same destination exist, the route with the lowest metric is used.
LAN Configuration
Figure 52 on page 104), click the Edit button
Figure 52 on page 104), select the check box
105