NETGEAR ProSafe FVS318N Reference Manual page 361

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
The following table explains the fields of the Detailed Status screen:
Table 88. Detailed Status screen information
Item Description
LAN Port Configuration
The following fields are shown for each of the LAN ports.
VLAN Profile The name of the VLAN profile that you assigned to this port on the LAN Setup screen
(see
this port, the default profile (with VLAN ID 1) is assigned automatically.
VLAN ID The VLAN ID that you assigned to this port on the Add VLAN Profile screen (see
Configure a VLAN Profile
is 1, which means that all tagged and untagged traffic can pass on this port.
MAC Address The MAC address for this port. Note the following about the LAN MAC address:
• All LAN ports that are part of the default VLAN share the same default MAC
• LAN ports that have an IPv4 address that differs from the default VLAN can still
• LAN port 8 can be assigned as the DMZ port, in which case it has a MAC address
IP Address The IP address for this port. If the port is part of the default VLAN, the IP address is the
default LAN IP address (192.168.1.1). For information about configuring VLAN
profiles, see
Subnet Mask The subnet mask for this port. If the port is part of the default VLAN, the subnet mask
is the default LAN IP subnet mask (255.255.255.0). For information about configuring
VLAN profiles, see
DHCP Status The status of the IPv4 DHCP server for the VLAN (Enabled or Disabled). For
information about enabling DHCP for VLANs, see
page 59.
WAN Configuration
MAC Address The default MAC address for the port or the MAC address that you have specified on
the Broadband Advanced Options screen for the port. For information about
configuring the MAC address, see
on page 50.
IP Address The IPv4 address and subnet mask of the WAN port. For information about configuring
the IPv4 address of the WAN port, see
WAN Settings
IPv6 Address The IPv6 address of the WAN port. For information about configuring the IPv4 address
of the WAN port, see
page 37.
WAN State The WAN state can be either UP or DOWN, depending on whether the port is
connected to the Internet.
Assign and Manage VLAN Profiles
on page 59). If the default VLAN profile is used, the VLAN ID
address, unless you have specified that each VLAN needs to be assigned a unique
MAC address (see Configure VLAN MAC Addresses and LAN Advanced Settings
on page 64).
share the same MAC address as the default VLAN.
that differs from the other LAN ports. For information about configuring the DMZ
port, see Enable and Configure the DMZ Port for IPv4 and IPv6 Traffic
Configure a VLAN Profile
Configure a VLAN Profile
on page 26.
Configure the IPv6 Internet Connection and WAN Settings
Monitor System Access and Performance
361
on page 56). If the VLAN is not enabled on
on page 59.
on page 59.
Configure a VLAN Profile
Configure Advanced WAN Options and Other Tasks
Configure the IPv4 Internet Connection and
on page 85.
on
on