NETGEAR ProSafe FVS318N Reference Manual page 309

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 188.
5. In the Defined Addresses Status section of the screen, select one of the following radio
buttons:
• Deny Login from Defined Addresses. Deny logging in from the IP addresses in the
Defined Addresses table.
• Allow Login only from Defined Addresses. Allow logging in from the IP addresses
in the Defined Addresses table.
6. Click Apply to save your settings.
7. In the Add Defined Addresses section of the screen, add an address to the Defined
Addresses table by entering the settings as explained in the following table:
Table 76. Defined addresses settings for IPv6
Setting
Source Address Type Select the type of address from the drop-down list:
Network Address / IP
Address
Prefix Length
8. Click the Add table button. The address is added to the Defined Addresses table.
Manage Users, Authentication, and VPN Certificates
Description
• IP Address. A single IPv6 address.
• IP Network. A subnet of IPv6 addresses. You need to enter a prefix length in the
Prefix Length field.
Depending on your selection from the Source Address Type drop-down list, enter
the IP address or the network address.
For a network address, enter the prefix length (0–64).
Note: By default, a single IPv6 address is assigned a prefix length of 64.
309