IPv6 LAN WAN Outbound Rules
To create a new IPv6 LAN WAN outbound rule:
1.
In the upper right of the LAN WAN Rules screen, select the IPv6 radio button. The screen
displays the IPv6 settings (see
2.
Click the Add table button under the Outbound Services table. The Add LAN WAN
Outbound Service screen for IPv6 displays:
Figure 66.
3.
Enter the settings as explained in
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down lists:
•
LAN Users
•
WAN Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
make a selection from the following drop-down lists:
•
Select Schedule
•
QoS Priority
4.
Click Apply to save your changes. The new rule is now added to the Outbound Services
table.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 64
Table 33
Firewall Protection
on page 139).
on page 131. In addition to selections from the
142