NETGEAR ProSafe FVS318N Reference Manual page 232


To delete one or more VPN polices:
1. Select the check box to the left of each policy that you want to delete, or click the Select
All table button to select all VPN policies.
2. Click the Delete table button.

To enable or disable one or more VPN policies:
1. Select the check box to the left of each policy that you want to enable or disable, or click
the Select All table button to select all VPN Policies.
2. Click the Enable or Disable table button.
For information about how to add or edit a VPN policy, see
on this page.
Manually Add or Edit a VPN Policy

To manually add a VPN policy:
1. Select VPN > IPSec VPN > VPN Policies. The VPN Policies screen displays the IPV4
settings (see Figure 141
2. Under the List of VPN Policies table, click the Add table button. The Add New VPN Policy
screen displays the IPv4 settings (see
3. Specify the IP version for which you want to add a VPN policy:
• IPv4. In the upper right of the screen, the IPv4 radio button is already selected by
default. Go to
• IPv6. Select the IPv6 radio button. The Add New VPN Policy screen for IPv6 displays
(see Figure 143
Virtual Private Networking Using IPSec and L2TP Connections
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
on page 231).
Step 4.
on page 234).
Manually Add or Edit a VPN Policy
Figure 142 on page 233).
232