NETGEAR ProSafe FVS318N Reference Manual page 151

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 73.
2. Enter the settings as explained in
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down lists:
• WAN Destination IP Address
• DMZ Users (This drop-down list is available only when the WAN mode is Classical
Routing. When the WAN mode is NAT, your network presents only one IP address to
the Internet.)
• WAN Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
make selections from the following drop-down lists:
• Select Schedule
• Send to DMZ Server
The following configuration is optional:
• Translate to Port Number
3. Click Apply to save your changes. The new rule is now added to the Inbound Services
table.
Table 34 on page 135. In addition to selections from the
Firewall Protection
151