NETGEAR ProSafe FVS318N Reference Manual page 339

Table 81. Edit User screen settings for SNMPv3 users (continued)
Setting
Authentication Algorithm
Authentication Password
Privacy Algorithm
Privacy Password
3. Click Apply to save your changes.

To configure the SNMP system information:
1. On the SNMP screen (see
arrow in the upper right of the screen. The SNMP SysConfiguration screen displays:
Figure 203.
2. Enter the settings as explained in the following table:
Table 82. SNMP SysConfiguration screen settings
Setting
SysContact
SysLocation
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Description
From the drop-down list, select the protocol for authenticating an SNMPv3 user:
• MD5. Message Digest 5. This is a hash algorithm that produces a 128-bit
digest.
• SHA1. Secure Hash Algorithm 1. This is a hash algorithm that produces a
160-bit digest.
The authentication password that an SNMPv3 user needs to enter to be granted
access to the SNMP agent that collects the MIB objects from the wireless VPN
firewall.
From the drop-down list, select the encryption method for the communication
between an SNMPv3 user and the SNMP agent that collects the MIB objects
from the wireless VPN firewall:
• DES. Data Encryption Standard.
• AES. Advanced Encryption Standard.
The privacy password that an SNMPv3 user needs to enter to allow decryption
of the MIB objects that the SNMP agent collects from the wireless VPN firewall.
Figure 200
Description
Enter the SNMP system contact information that is available to the SNMP manager.
This setting is optional.
Enter the physical location of the wireless VPN firewall. This setting is optional.
Network and System Management
on page 336), click the SNMP System Info option
339