NETGEAR ProSafe FVS318N Reference Manual page 32

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 13.
5. If your connection is PPTP or PPPoE, your ISP requires an initial login. Enter the settings as
explained in the following table:
Table 3. PPTP and PPPoE settings
Setting Description
Austria (PPTP) If your ISP is Austria Telecom or any other ISP that uses PPTP for login, select this
radio button, and enter the following settings:
Account Name
Note: For login
and password
information, see
Step 2 and Step 3.
Domain Name
Idle Timeout
My IP Address
Server IP
Address
The account name is also known as the host name or system name.
Enter the valid account name for the PPTP connection (usually your
email ID assigned by your ISP). Some ISPs require you to enter
your full email address here.
Your domain name or workgroup name assigned by your ISP, or
your ISP's domain name. You can leave this field blank.
Select the Keep Connected radio button to keep the connection
always on. To log out after the connection is idle for a period, select
the Idle Timeout radio button and, in the Idle Timeout field, enter the
number of minutes to wait before disconnecting. This is useful if your
ISP charges you based on the period that you have logged in.
The IP address assigned by the ISP to make the connection with the
ISP server.
The IP address of the PPTP server.
IPv4 and IPv6 Internet and Broadband Settings
32