NETGEAR ProSafe FVS318N Reference Manual page 134

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
LAN Groups screen to keep the computer's IP address constant (see
Address Reservation
• Local computers need to access the local server using the computers' local LAN address.
Attempts by local computers to access the server using the external WAN IP address will
fail.
Note: See Configure Port Triggering
allow certain types of inbound traffic that would otherwise be blocked
by the firewall.
Note: The wireless VPN firewall always blocks denial of service (DoS)
attacks. A DoS attack does not attempt to steal data or damage your
computers, but overloads your Internet connection so you cannot
use it (that is, the service becomes unavailable).
Note: When the Block TCP Flood and Block UDP Flood check boxes are
selected on the Attack Checks screen (which they are by default;
see Attack Checks
the same application from one host or IP address (such as multiple
DNS queries from one computer) trigger the wireless VPN firewall's
DoS protection.
The following table describes the fields that define the rules for inbound traffic and that are
common to most Inbound Service screens (see
page 151, and Figure 79
The steps to configure inbound rules are described in the following sections:
• Configure LAN WAN Rules
• Configure DMZ WAN Rules
• Configure LAN DMZ Rules
on page 72).
on page 190 for yet another way to
on page 166), multiple concurrent connections of
on page 157).
Firewall Protection
134
Figure 67 on page 144,
Set Up DHCP
Figure 73 on