NETGEAR ProSafe FVS318N Reference Manual page 97

Figure 48.
2. Enter the settings as explained in the following table:
Table 23. Add Advertisement Prefix screen settings for the DMZ
Setting
IPv6 Prefix Type
SLA ID
IPv6 Prefix
IPv6 Prefix Length Enter the IPv6 prefix length (typically 64) that should be included in the advertisement.
Prefix Lifetime
3. Click Apply to save your changes and add the new IPv6 address pool to the List of
Prefixes to Advertise table on the RADVD screen for the DMZ.

To edit an advertisement prefix:
1. On the RADVD screen for the DMZ (see
the Action column for the advertisement prefix that you want to modify. The Add
Advertisement Prefix screen displays.
2. Modify the settings as explained in the previous table.
3. Click Apply to save your settings.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Description
Specify the IPv6 prefix type by making a selection from the drop-down list:
• 6to4. The prefix is for a 6to4 address. You need to complete the SLA ID field and
Prefix Lifetime field. The other fields are masked out.
• Global/Local/ISATAP. The prefix is for a global, local, or ISATAP address. This
needs to be a global prefix or a site-local prefix; it cannot be a link-local prefix. You
need to complete the IPv6 Prefix field, IPv6 Prefix Length field, and Prefix Lifetime
field. The SLA ID field is masked out.
Enter the site level aggregation identifier (SLA ID) for the 6to4 address prefix that
should be included in the advertisement.
Enter the IPv6 prefix for the wireless VPN firewall's DMZ that should be included in the
advertisement.
The prefix lifetime specifies how long the IP address that was created as a result of the
router advertisement should remain valid.
Enter the prefix lifetime in seconds that should be included in the advertisement. The
minimum period is 0 seconds; the maximum period is 65536 seconds.
LAN Configuration
Figure 47 on page 95), click the Edit button in
97