Edit Network Resources To Specify Addresses - NETGEAR ProSafe FVS318N Reference Manual

Figure 168.
2. In the Add New Resource section of the screen, specify information in the following fields:
• Resource Name. A descriptive name of the resource for identification and
management purposes.
• Service. From the Service drop-down list, select the type of service to which the
resource applies:
- VPN Tunnel. The resource applies only to a VPN tunnel.
- Port Forwarding. The resource applies only to port forwarding.
- All. The resource applies both to a VPN tunnel and to port forwarding.
3. Click the Add table button. The new resource is added to the List of Resources table.

To delete one or more network resources:
1. Select the check box to the left of each network resource that you want to delete, or
click the Select All table button to select all network resources.
2. Click the Delete table button.

Edit Network Resources to Specify Addresses


To edit network resources:
1. Select VPN > SSL VPN > Resources. The Resources screen displays (see the
previous figure, which shows some examples).
2. In the List of Resources table, to the right of the new resource in the Action column, click the
Edit table button. A new screen that lets you edit the resource displays the IPv4 settings.
(The following figure shows some examples.)
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Virtual Private Networking Using SSL Connections
280