NETGEAR ProSafe FVS318N Reference Manual page 333

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 199. Remote Management screen for IPv6
3. Enter the settings as explained in the following table:
Table 79. Remote Management screen settings for IPv4 and IPv6
Setting
Secure HTTP Management
Allow Secure HTTP
Management?
Description
To enable secure HTTP management, select the Yes radio button, which is the
default setting. To disable secure HTTP management, select the No radio button.
Specify the addresses through which access is allowed by selecting one of the
following radio buttons:
• Everyone. There are no IP address restrictions.
• IP address range. Only users who use devices in the specified IP address range
can securely manage over an HTTP connection. In the From fields, type the start IP
address of the range; in the To fields, type the end IP address of the range.
• Only this PC. Only a user who uses the device with the specified IP address can
securely manage over an HTTP connection. Type the IP address in the fields.
Network and System Management
333