NETGEAR ProSafe FVS318N Reference Manual page 307

3. Make the following optional selections:
• To prohibit the user from logging in to the wireless VPN firewall, select the Disable
Login check box.
• To prohibit the user from logging in from the WAN interface, select the Deny Login
from WAN Interface check box. In this case, the user can log in only from the LAN
interface.
Note: For security reasons, the Deny Login from WAN Interface check box
is selected by default for guests and administrators. The Disable
Login check box is disabled (masked out) for administrators.
4. Click Apply to save your settings.
Configure Login Restrictions Based on IPv4 Addresses

To restrict logging in based on IPv4 addresses:
1. Select Users > Users. The Users screen displays (see
2. In the Action column of the List of Users table, click the Policies table button for the user for
which you want to set login policies. The policies submenu tabs display, with the Login
Policies screen in view.
3. Click the By Source IP Address submenu tab. In the upper right of the screen, the IPv4
radio button is selected by default. The By Source IP Address screen displays the IPv4
settings. (The following figure shows an IP address in the Defined Addresses table as an
example.)
Figure 187.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Manage Users, Authentication, and VPN Certificates
Figure 184
307
on page 304).