Edit Network Resources To Specify Addresses - NETGEAR SRX5308 Reference Manual

- Port Forwarding. The resource applies only to port forwarding.
- All. The resource applies both to a VPN tunnel and to port forwarding.
3. Click the Add table button. The new resource is added to the List of Resources table.

To delete one or more network resources:
1. Select the check box to the left of the network resource that you want to delete, or click
the Select All table button to select all VPN policies.
2. Click the Delete table button.

Edit Network Resources to Specify Addresses

After you have defined a resource on the Resources screen, you can assign an IP or network
address and a port or port range to the resource.

To edit a resource:
1. Select VPN > SSL VPN > Resources. The Resources screen displays (see the
previous figure, which shows some examples).
2. In the List of Resources table, to the right of the new resource in the Action column, click the
Edit table button. A new screen displays. (The following figure shows an example.)
Figure 129.
3. Complete the settings as explained the following table:
Table 53. Edit Resources screen settings
Setting
Resource Name
Service
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Description
The unique identifier for the resource. For information only. (You cannot edit
the resource name after you have created it on the Resources screen.)
The SSL service that is assigned to the resource. For information only. (You
cannot edit the service after you have assigned it to the resource on the
Resources screen.)
Virtual Private Networking Using SSL Connections
211