Table of Contents
Advertisement
Defining Line Passwords
Network administrators can define line passwords in the Line Password Page. The administrator enters the new
password in the Password column and then confirms it in the Confirm Password column. After the line password
is defined, a management method is assigned to the password. The device can be accessed using the following
methods:
•
Console
•
Telnet
•
Secure Telnet
To define line passwords:
1.
Click Mgmt. Security > Line Password. The Line Password Page opens:
Figure 28: Line Password Page
The Line Password Page contains the following fields:
•
Console Line Password — Defines the line password for accessing the device via a Console session.
Passwords can contain a maximum of 159 characters.
•
Telnet Line Password — Defines the line password for accessing the device via a Telnet session.
Passwords can contain a maximum of 159 characters.
•
Secure Telnet Line Password — Defines the line password for accessing the device via a secure Telnet
session. Passwords can contain a maximum of 159 characters.
2.
Define the Password and Confirm Password fields for the relevant connection.
3.
Click Apply. The passwords are modified, and the device is updated.
Configuring Server Based Authentication
Page 46
Configuring Device Security
Advertisement
Table of Contents
