Table of Contents
Advertisement
Figure 115: Power Over Ethernet Page
The Power Over Ethernet Page contains the following fields:
Global PoE Configuration
•
Power Threshold — Indicates the percentage of power consumed before an alarm is generated. The value
range is 1-99 percent; the default value is 95 percent.
If maximum power available is 375 W, and the power threshold is 95%, the threshold is exceeded when the
PoE devices require more than 356.25 W.
•
Maximum Power Available — Indicates the maximum power allocated to the device.
•
Unit Number — Indicates the stacking member for which the PoE information is displayed.
2.
Click the ports to enable. Clicking a port toggles it through the possible settings.
3.
Define the fields.
4.
Click Modify. PoE is enabled on the device and global settings are saved. The new threshold is immediately
activated on the device.
5.
Click Save Config on the menu to permanently save the change.
Page 150
Configuring Power Over Ethernet
Advertisement
Table of Contents
