Viewing Etherlike Statistics
The Etherlike Statistics Page displays interface statistics.
To view Etherlike statistics:
1.
Click Statistics > Etherlike. The Etherlike Statistics Page page opens:
Figure 131:Etherlike Statistics Page
The Etherlike Statistics Page contains the following fields:
•
Select the interfaces displayed in the table.
–
Unit No. — Indicates the stacking member for which the Etherlike statistics are displayed.
–
Port — Specifies the port for which the Etherlike statistics are displayed.
–
Trunk — Defines the specific trunk for which the Etherlike statistics are displayed.
•
Refresh Rate — Defines the frequency of the interface statistics updates. The possible field values are:
–
No Refresh — Indicates that the Etherlike statistics are not refreshed.
–
15 Sec — Indicates that the Etherlike statistics are refreshed every 15 seconds.
–
30 Sec — Indicates that the Etherlike statistics are refreshed every 30 seconds.
–
60 Sec — Indicates that the Etherlike statistics are refreshed every 60 seconds.
•
Frame Check Sequence (FCS) Errors — Displays the number of FCS errors received on the selected
interface.
•
Single Collision Frames — Displays the number of single collision frames received on the selected
interface.
•
Late Collisions — Displays the number of late collision frames received on the selected interface.
Page 171
Viewing Statistics
Viewing Device Statistics