Table of Contents
Advertisement
•
Interface Status — Indicates the interface's membership status in the VLAN. The possible field values are:
–
Tagged — Indicates the interface is a tagged member of a VLAN. All packets forwarded by the interface
are tagged. The packets contain VLAN information.
–
Untagged — Indicates the interface is an untagged VLAN member. Packets forwarded by the interface
are untagged. In the default VLAN, this is the default value for all interfaces.
–
Excluded — Indicates that the port is excluded from the VLAN.
–
Forbidden — Indicates that the port cannot be included in the VLAN.
2.
Click the Add button. The Add VLAN Page opens:
Figure 66: Add VLAN Page
3.
Define the fields.
4.
Click Apply. The VLAN is created, and the device is updated.
To modify VLAN settings:
1.
Click Layer 2 > VLAN. The VLAN Page opens:
2.
Select a VLAN from the table.
3.
Click Modify. The VLAN Configuration opens.
Figure 67: VLAN Configuration
4.
Change the Interface Status setting.
5.
Click Apply. The VLAN configuration is modified, and the device is updated.
6.
Click Save Config on the menu to permanently save the change.
Page 95
Configuring Interfaces
Configuring VLANs
Advertisement
Table of Contents
