Table of Contents
Advertisement
2.
From the global Interface field, define the specific port or trunk.
3.
In the table, select an interface and click Modify. The Trusted Configuration page opens.
Figure 48: Trusted Configuration Page
4.
Edit the following field:
•
Trusted Status — Indicates whether the interface is a Trusted Interface.
–
Enable — Interface is in trusted mode.
–
Disable — Interface is in untrusted mode.
5.
Click Apply. The Trusted Interfaces configuration is defined and the device is updated.
6.
Click Save Config on the menu to save the changes permanently.
Page 72
Configuring DHCP Snooping
Advertisement
Table of Contents
