Table of Contents
Advertisement
Figure 94: Add Multicast Group Page
4.
Select the VLAN ID.
5.
Enter the Bridge Multicast MAC Address and the Bridge Multicast IP Address.
6.
Click Apply. The new Multicast group is saved and the device is updated.
To modify a multicast group:
1.
Click Modify. The Multicast Group Configuration Page opens:
Figure 95: Multicast Group Configuration Page
2.
Define the fields.
3.
Click Apply. The Multicast Group is saved and the device is updated.
Configuring Multicast Forwarding
Page 128
Advertisement
Table of Contents
