Table of Contents
Advertisement
Figure 83: Spanning Tree Configuration Page
In addition to the STP Interface Configuration Page, the port-level Spanning Tree Configuration Page contains the
following fields:
•
Default Path Cost — Select if the default path cost of the port is automatically set by the port speed and the
default path cost method.
5.
Select Enable in the STP field.
6.
Define the Port Fast, Enable Root Guard, Path Cost, Default Path Cost, and Priority fields.
7.
Click Apply. STP is enabled on the interface, and the device is updated.
Page 113
Configuring Spanning Tree
Configuring Classic Spanning Tree
Advertisement
Table of Contents
