Table of Contents
Advertisement
Defining VLAN Interface Settings
The VLAN Interface Page contains fields for managing ports that are part of a VLAN.
To define a VLAN interface:
1.
Click Layer 2 > VLAN Interface. The VLAN Interface Page opens:
Figure 68: VLAN Interface Page
The VLAN Interface Page displays the VLAN interface information for a selected Port/Unit or Trunk:
•
Select the interfaces displayed in the table.
–
Ports of Unit — Specifies the port and stacking member for which the VLAN mapping is displayed.
–
Trunk — Specifies the trunk for which the VLAN mapping is displayed.
•
Interface — Displays the port or trunk number.
•
Interface VLAN Mode — Indicates the interface membership status in the VLAN. The possible values are:
–
General — Indicates the port belongs to VLANs, and each VLAN's interface is user-defined as tagged or
untagged (full IEEE802.1q mode).
–
Access — Indicates a port belongs to a single untagged VLAN. When a port is in Access mode, the
packet types which are accepted on the port cannot be designated. Ingress filtering is always enabled for
ports in Access mode.
–
Trunk — Indicates the port belongs to VLANs in which all VLANs are tagged, except for one VLAN that is
untagged.
Page 96
Configuring Interfaces
Configuring VLANs
Advertisement
Table of Contents
